Jump to content

Mangos Zero Crashing on Start

Talrain
 Share

Recommended Posts

Talrain Newbie

Talrain

Posted
Posted

Greetings,

I've worked with Arcemu for years, but have just started to get into Mangos.

When I start Realmd for Mangos Zero, the black box comes up to start the server, shoots out a single line of text that says it cannot connect to realmd.config. and exits before I can read a single word. Searching forums on ownedcore has been unproductive. Here is a copy of my configs although I'm not sure that's the issue. I'd normally post on the MangosZero forum, but it appears to be down and I doubt this error is limited to zero (a guide error if I had to wager).

This is the guide I followed and I suspect the problem may lay in there if anyone has any constructive criticism toward the author that may help me : http://www.ownedcore.com/forums/world-of-warcraft/world-of-warcraft-emulator-servers/wow-emu-guides-tutorials/325497-mangos-zero-compiling.html

Thank you so much whoever knows how to fix this!

############################################
# MaNGOS realmd configuration file         #
############################################

[RealmdConf]
ConfVersion=2010062001

###################################################################################################################
# REALMD SETTINGS
#
#    LoginDatabaseInfo
#        Database connection settings for the realm server.
#        Default: hostname;port;username;password;database
#                 .;somenumber;username;password;database - use named pipes at Windows
#                       Named pipes: mySQL required adding "enable-named-pipe" to [mysqld] section my.ini
#                 .;/path/to/unix_socket;username;password;database - use Unix sockets at Unix/Linux
#                       Unix sockets: experimental, not tested
#
#    LogsDir
#         Logs directory setting.
#         Important: Logs dir must exists, or all logs be disable
#         Default: "" - no log directory prefix. if used log names aren't absolute paths
#                       then logs will be stored in the current directory of the running program.
#
#    MaxPingTime
#         Settings for maximum database-ping interval (minutes between pings)
#
#    RealmServerPort
#         Port on which the server will listen
#
#    BindIP
#         Bind Realm Server to IP/hostname
#         This option is useful for running multiple worldd/realmd instances
#         on different IP addresses using default ports.
#         DO NOT CHANGE THIS UNLESS YOU _REALLY_ KNOW WHAT YOU'RE DOING
#
#    PidFile
#        Realmd daemon PID file
#        Default: ""             - do not create PID file
#                 "./realmd.pid" - create PID file (recommended name)
#
#    LogLevel
#        Server console level of logging
#        0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 0
#
#    LogTime
#        Include time in server console output [hh:mm:ss]
#        Default: 0 (no time)
#                 1 (print time)
#
#    LogFile
#        Logfile name
#        Default: "Realmd.log"
#                 "" - empty name disable creating log file
#
#    LogTimestamp
#        Logfile with timestamp of server start in name
#        Default: 0 - no timestamp in name
#                 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
#    LogFileLevel
#        Server file level of logging
#        0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 0
#
#    LogColors
#        Color for messages (format "normal_color details_color debug_color error_color)
#        Colors: 0 - BLACK, 1 - RED, 2 - GREEN,  3 - BROWN, 4 - BLUE, 5 - MAGENTA, 6 -  CYAN, 7 - GREY,
#                8 - YELLOW, 9 - LRED, 10 - LGREEN, 11 - LBLUE, 12 - LMAGENTA, 13 - LCYAN, 14 - WHITE
#        Default: "" - none colors
#                 "13 7 11 9" - for example 
#
#    UseProcessors
#        Used processors mask for multi-processors system (Used only at Windows)
#        Default: 0 (selected by OS)
#                 number (bitmask value of selected processors)
#
#    ProcessPriority
#        Process proirity setting (Used only at Windows)
#        Default: 1 (HIGH)
#                 0 (Normal)
#
#    WaitAtStartupError
#        After startup error report wait <Enter> or some time before continue (and possible close console window)
#                 -1 (wait until <Enter> press)
#        Default:  0 (not wait)
#                  N (>0, wait N secs)
#
#    RealmsStateUpdateDelay
#        Realm list Update up delay (updated at realm list request if delay expired).
#        Default: 20
#                 0  (Disabled)
#
#    WrongPass.MaxCount
#        Number of login attemps with wrong password before the account or IP is banned
#        Default: 0  (Never ban)
#
#    WrongPass.BanTime
#        Duration of the ban in seconds (0 means permanent ban)
#        Default: 600
#
#    WrongPass.BanType
#        Ban the IP or account on which login is attempted
#        Default: 0 (Ban IP)
#                 1 (Ban Account)
#
###################################################################################################################

LoginDatabaseInfo = "127.0.0.1;3306;root;A66056504;realmd"
LogsDir = ""
MaxPingTime = 30
RealmServerPort = 3724
BindIP = "0.0.0.0"
PidFile = ""
LogLevel = 1
LogTime = 1
LogFile = "Realmd.log"
LogTimestamp = 1
LogFileLevel = 1
LogColors = ""
UseProcessors = 0
ProcessPriority = 1
WaitAtStartupError = 0
RealmsStateUpdateDelay = 20
WrongPass.MaxCount = 0
WrongPass.BanTime = 600
WrongPass.BanType = 0




#####################################
# MaNGOS Configuration file         #
#####################################

[MangosdConf]
ConfVersion=2010100901

###################################################################################################################
# CONNECTIONS AND DIRECTORIES
#
#    RealmID
#        RealmID must match the realmlist inside the realmd database
#
#    DataDir
#        Data directory setting.
#        Important: DataDir needs to be quoted, as it is a string which may contain space characters.
#        Example: "@CMAKE_INSTALL_PREFIX@/share/mangos"
#
#    LogsDir
#        Logs directory setting.
#        Important: Logs dir must exists, or all logs need to be disabled
#        Default: "" - no log directory prefix. if used log names aren't absolute paths
#                      then logs will be stored in the current directory of the running program.
#
#
#    LoginDatabaseInfo
#    WorldDatabaseInfo
#    CharacterDatabaseInfo
#        Database connection settings for the world server.
#        Default:
#                ---MYSQL---
#                    hostname;port;username;password;database
#                    .;somenumber;username;password;database - use named pipes at Windows
#                        Named pipes: mySQL required adding "enable-named-pipe" to [mysqld] section my.ini
#                    .;/path/to/unix_socket;username;password;database - use Unix sockets at Unix/Linux
#                ---PGSQL---
#                    hostname;port;username;password;database
#                    .;/path/to/unix_socket/DIRECTORY or . for default path;username;password;database - use Unix sockets at Unix/Linux
#
#    LoginDatabaseConnections
#    WorldDatabaseConnections
#    CharacterDatabaseConnections
#         Amount of connections to database which will be used for SELECT queries. Maximum 16 connections per database.
#         Please, note, for data consistency only one connection for each database is used for transactions and async SELECTs.
#         So formula to find out how many connections will be established: X = _connections + 1
#         Default: 1 connection for SELECT statements
#
#    MaxPingTime
#        Settings for maximum database-ping interval (minutes between pings)
#
#    WorldServerPort
#        Port on which the server will listen
#
#    BindIP
#        Bind World Server to IP/hostname
#        This option is useful for running multiple worldd/realmd instances
#        on different IP addresses using default ports.
#        DO NOT CHANGE THIS UNLESS YOU _REALLY_ KNOW WHAT YOU'RE DOING
#
###################################################################################################################

RealmID = 1
DataDir = "."
LogsDir = ""
LoginDatabaseInfo     = "127.0.0.1;3306;root;A66056504;realmd"
WorldDatabaseInfo     = "127.0.0.1;3306;root;A66056504;mangos"
CharacterDatabaseInfo = "127.0.0.1;3306;root;A66056504;characters"
LoginDatabaseConnections = 1
WorldDatabaseConnections = 1
CharacterDatabaseConnections = 1
MaxPingTime = 30
WorldServerPort = 8085
BindIP = "0.0.0.0"

###################################################################################################################
# PERFORMANCE SETINGS
#
#    UseProcessors
#        Used processors mask for multi-processors system (Used only at Windows)
#        Default: 0 (selected by OS)
#                 number (bitmask value of selected processors)
#
#    ProcessPriority
#        Process priority setting (Used only at Windows)
#        Default: 1 (HIGH)
#                 0 (Normal)
#
#    Compression
#        Compression level for update packages sent to client (1..9)
#        Default: 1 (speed)
#                 9 (best compression)
#
#    PlayerLimit
#        Maximum number of players in the world. Excluding Mods, GM's and Admins
#        Default: 100
#                 0 (for infinite players)
#                -1 (for Mods, GM's and Admins only)
#                -2 (for GM's and Admins only)
#                -3 (for Admins only)
#
#    SaveRespawnTimeImmediately
#        Save respawn time for creatures at death and for gameobjects at use/open
#        Default: 1 (save creature/gameobject respawn time without waiting grid unload)
#                 0 (save creature/gameobject respawn time at grid unload)
#
#    MaxOverspeedPings
#        Maximum overspeed ping count before player kick (minimum is 2, 0 used to disable check)
#        Default: 2
#
#    GridUnload
#        Unload grids (if you have lot memory you can disable it to speed up player move to new grids second time)
#        Default: 1 (unload grids)
#                 0 (do not unload grids)
#
#    GridCleanUpDelay
#        Grid clean up delay (in milliseconds)
#        Default: 300000 (5 min)
#
#    MapUpdateInterval
#        Map update interval (in milliseconds)
#        Default: 100
#
#    ChangeWeatherInterval
#        Weather update interval (in milliseconds)
#        Default: 600000 (10 min)
#
#    PlayerSave.Interval
#        Player save interval (in milliseconds)
#        Default: 900000 (15 min)
#
#    PlayerSave.Stats.MinLevel
#        Minimum level for saving character stats for external usage in database
#        Default: 0  (do not save character stats)
#                 1+ (save stats for characters with level 1+)
#
#    PlayerSave.Stats.SaveOnlyOnLogout
#        Enable/Disable saving of character stats only on logout
#        Default: 1 (only save on logout)
#                 0 (save on every player save)
#
#    vmap.enableLOS
#    vmap.enableHeight
#        Enable/Disable VMaps support for line of sight and height calculation
#        You need to extract the VMaps in order to enable those options
#        Default: 1 (true)
#                 0 (false)
#
#    vmap.ignoreSpellIds
#        These spells are ignored for LoS calculation
#        List of ids with delimiter ','
#
#    vmap.enableIndoorCheck
#        Enable/Disable VMap based indoor check to remove outdoor-only auras (mounts etc.).
#        Requires VMaps enabled to work.
#        Default: 1 (Enabled)
#                 0 (Disabled)
#
#
#    DetectPosCollision
#        Check final move position, summon position, etc for visible collision with other objects or
#        wall (wall only if vmaps are enabled)
#        Default: 1 (enable, requires more CPU power)
#                 0 (disable, not so nice position selection but will require less CPU power)
#
#    TargetPosRecalculateRange
#        Max distance from movement target point (+moving unit size) and targeted object (+size)
#        after that new target movement point calculated. Max: melee attack range (5), min: contact range (0.5)
#        More distance let have better performence, less distance let have more sensitive reaction at target move.
#        Default: 1.5
#
#    UpdateUptimeInterval
#        Update realm uptime period in minutes (for save data in 'uptime' table). Must be > 0
#        Default: 10 (minutes)
#
#    MaxCoreStuckTime
#        Periodically check if the process got freezed, if this is the case force crash after the specified
#        amount of seconds. Must be > 0. Recommended > 10 secs if you use this.
#        Default: 0 (Disabled)
#
#    AddonChannel
#        Permit/disable the use of the addon channel through the server
#        (some client side addons can stop work correctly with disabled addon channel)
#        Default: 1 (permit addon channel)
#                 0 (do not permit addon channel)
#
#    CleanCharacterDB
#        Perform character db cleanups on start up
#        Default: 1 (Enable)
#                 0 (Disabled)
#
###################################################################################################################

UseProcessors = 0
ProcessPriority = 1
Compression = 1
PlayerLimit = 100
SaveRespawnTimeImmediately = 1
MaxOverspeedPings = 2
GridUnload = 1
GridCleanUpDelay = 300000
MapUpdateInterval = 100
ChangeWeatherInterval = 600000
PlayerSave.Interval = 900000
PlayerSave.Stats.MinLevel = 0
PlayerSave.Stats.SaveOnlyOnLogout = 1
vmap.enableLOS = 1
vmap.enableHeight = 1
vmap.ignoreSpellIds = "7720"
vmap.enableIndoorCheck = 1
DetectPosCollision = 1
TargetPosRecalculateRange = 1.5
UpdateUptimeInterval = 10
MaxCoreStuckTime = 0
AddonChannel = 1
CleanCharacterDB = 1

###################################################################################################################
# SERVER LOGGING
#
#    LogSQL
#        Enable logging of GM commands - all SQL code will be written to a log file
#        All commands are written to a file: YYYY-MM-DD_logSQL.sql
#        If a new day starts (00:00:00), a new file is created - the old file will not be deleted.
#        Default: 1 - Write SQL code to logfile
#                 0 - Do not log
#
#    PidFile
#        World daemon PID file
#        Default: ""             - do not create PID file
#                 "./worldd.pid" - create PID file (recommended name)
#
#    LogLevel
#        Server console level of logging
#        0 = Minimum; 1 = Basic&Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    LogTime
#        Include time in server console output [hh:mm:ss]
#        Default: 0 (no time)
#                 1 (print time)
#
#    LogFile
#        Logfile name
#        Default: "Server.log"
#                 "" - Empty name disable creating log file
#
#    LogTimestamp
#        Logfile with timestamp of server start in name
#        Default: 0 - no timestamp in name
#                 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
#    LogFileLevel
#        Server file level of logging
#        0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 0
#
#    LogFilter_TransportMoves
#    LogFilter_CreatureMoves
#    LogFilter_VisibilityChanges
#    LogFilter_Weather
#    LogFilter_DbStrictedCheck
#        Log filters (active by default)
#        Default: 1 - not include with any log level
#                 0 - include in log if log level permit
#
#    LogFilter_PeriodicAffects
#    LogFilter_PlayerMoves
#    LogFilter_SQLText
#    LogFilter_AIAndMovegens
#    LogFilter_PlayerStats
#    LogFilter_Damage
#    LogFilter_Combat
#    LogFilter_SpellCast
#        Log filters (disabled by default, mostly debug only output affected cases)
#        Default: 0 - include in log if log level permit
#                 1 - not include with any log level
#
#    WorldLogFile
#        Packet logging file for the worldserver
#        Default: "world.log"
#
#    WorldLogTimestamp
#        Logfile with timestamp of server start in name
#        Default: 0 - no timestamp in name
#                 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
#    DBErrorLogFile
#        Log file of DB errors detected at server run
#        Default: "DBErrors.log"
#
#    CharLogFile
#        Character operations logfile name
#        Default: "Char.log"
#                 "" - Empty name disable creating log file
#
#    CharLogTimestamp
#        Logfile with timestamp of server start in name
#        Default: 0 - no timestamp in name
#                 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
#    CharLogDump
#        Write character dump before deleting in Char.log
#        For restoration, cut character data from log starting from
#        line == START DUMP == to line == END DUMP == (without its) in file and load it using loadpdump command
#        Default: 0 - don't include dumping chars to log
#                 1 - include dumping chars to log
#
#    GmLogFile
#        GM Log file of gm commands
#        Default: "" (Disable)
#
#    GmLogTimestamp
#        GM Logfile with timestamp of server start in name
#        Default: 0 - no timestamp in name
#                 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
#    GmLogPerAccount
#        GM Logfiles with GM account id (Note: logs not created if GmLogFile not set)
#        Default: 0 - add gm log data to single log file
#                 1 - add gm log data to account specific log files with name
#                     in form Logname_#ID_YYYY-MM-DD_HH-MM-SS.Ext
#                     or form Logname_#ID.Ext
#
#    RaLogFile
#        Log file of RA commands
#        Default: "Ra.log"
#                 "" - Empty name for disable
#
#    LogColors
#        Color for messages (format "normal_color details_color debug_color error_color")
#        Colors: 0 - BLACK, 1 - RED, 2 - GREEN,  3 - BROWN, 4 - BLUE, 5 - MAGENTA, 6 -  CYAN, 7 - GREY,
#                8 - YELLOW, 9 - LRED, 10 - LGREEN, 11 - LBLUE, 12 - LMAGENTA, 13 - LCYAN, 14 - WHITE
#        Default: "" - none colors
#        Example: "13 7 11 9"
#
###################################################################################################################

LogSQL = 1
PidFile = ""
LogLevel = 3
LogTime = 0
LogFile = "Server.log"
LogTimestamp = 0
LogFileLevel = 0
LogFilter_TransportMoves = 1
LogFilter_CreatureMoves = 1
LogFilter_VisibilityChanges = 1
LogFilter_Weather = 1
LogFilter_DbStrictedCheck = 1
LogFilter_PeriodicAffects = 0
LogFilter_PlayerMoves = 0
LogFilter_SQLText = 0
LogFilter_AIAndMovegens = 0
LogFilter_PlayerStats = 0
LogFilter_Damage = 0
LogFilter_Combat = 0
LogFilter_SpellCast = 0
WorldLogFile = ""
WorldLogTimestamp = 0
DBErrorLogFile = "DBErrors.log"
CharLogFile = "Char.log"
CharLogTimestamp = 0
CharLogDump = 0
GmLogFile = ""
GmLogTimestamp = 0
GmLogPerAccount = 0
RaLogFile = ""
LogColors = ""

###################################################################################################################
# SERVER SETTINGS
#
#    GameType
#        Server realm style
#        0 = NORMAL; 1 = PVP; 4 = NORMAL; 6 = RP; 8 = RPPVP
#        also custom type: 16 FFA_PVP (free for all pvp mode like arena PvP in all zones except rest
#        activated places and sanctuaries)
#
#    RealmZone
#        Server realm zone (set allowed alphabet in character names/etc). See also Strict*Names options.
#
#    1 Development    - any language (Default)
#    2 United States  - extended-Latin
#    3 Oceanic        - extended-Latin
#    4 Latin America  - extended-Latin
#    5 Tournament     - basic-Latin at create, any at login
#    6 Korea          - East-Asian
#    7 Tournament     - basic-Latin at create, any at login
#    8 English        - extended-Latin
#    9 German         - extended-Latin
#    10 French        - extended-Latin
#    11 Spanish       - extended-Latin
#    12 Russian       - Cyrillic
#    13 Tournament    - basic-Latin at create, any at login
#    14 Taiwan        - East-Asian
#    15 Tournament    - basic-Latin at create, any at login
#    16 China         - East-Asian
#    17 CN1           - basic-Latin at create, any at login
#    18 CN2           - basic-Latin at create, any at login
#    19 CN3           - basic-Latin at create, any at login
#    20 CN4           - basic-Latin at create, any at login
#    21 CN5           - basic-Latin at create, any at login
#    22 CN6           - basic-Latin at create, any at login
#    23 CN7           - basic-Latin at create, any at login
#    24 CN8           - basic-Latin at create, any at login
#    25 Tournament    - basic-Latin at create, any at login
#    26 Test Server   - any language
#    27 Tournament    - basic-Latin at create, any at login
#    28 QA Server     - any language
#    29 CN9           - basic-Latin at create, any at login
#
#    DBC.Locale
#        DBC Language Settings
#        0 = English; 1 = Korean; 2 = French; 3 = German; 4 = Chinese; 5 = Taiwanese; 6 = Spanish;
#        255 = Auto Detect (Default)
#
#    StrictPlayerNames
#        Limit player name to language specific symbols set, not allow create characters, and set rename request and disconnect at not allowed symbols name
#        Default: 0 disable (but limited server timezone dependent client check)
#                 1 basic latin characters  (strict)
#                 2 realm zone specific (strict). See RealmZone setting.
#                   Note: In any case if you want correctly see character name at client this client must have apporopriate fonts
#                   (included in client by default, with active official localization or custom localization fonts in clientdir/Fonts).
#                 3 basic latin characters + server timezone specific
#
#    StrictCharterNames
#        Limit guild team charter names to language specific symbols set, not allow create charters with not allowed symbols in name
#        Default: 0 disable
#                 1 basic latin characters  (strict)
#                 2 realm zone specific (strict). See RealmZone setting.
#                   Note: In any case if you want correctly see character name at client this client must have apporopriate fonts
#                   (included in client by default, with active official localization or custom localization fonts in clientdir/Fonts).
#                 3 basic latin characters + server timezone specific
#
#    StrictPetNames
#        Limit pet names to language specific symbols set
#        Default: 0 disable
#                 1 basic latin characters  (strict)
#                 2 realm zone specific (strict). See RealmZone setting.
#                   Note: In any case if you want correctly see character name at client this client must have apporopriate fonts
#                   (included in client by default, with active official localization or custom localization fonts in clientdir/Fonts).
#                 3 basic latin characters + server timezone specific
#
#    MinPlayerName
#        Minimal name length (1..12)
#        Default: 2
#
#    MinCharterName
#        Minimal name length (1..24)
#        Default: 2
#
#    MinPetName
#        Minimal name length (1..12)
#        Default: 2
#
#    CharactersCreatingDisabled
#        Disable characters creating for specific team or any (non-player accounts not affected)
#        Default: 0 - enabled
#                 1 - disabled only for Alliance
#                 2 - disabled only for Horde
#                 3 - disabled for both teams
#
#    CharactersPerAccount
#        Limit numbers of characters per account (at all realms).
#        Note: this setting limits the character creating at the _current_ realm base at characters amount at all realms
#        Default: 50
#                The number must be >= CharactersPerRealm
#
#    CharactersPerRealm
#        Limit numbers of characters for account at realm
#        Default: 10 (client limitation)
#                The number must be between 1 and 10
#
#    SkipCinematics
#        Disable in-game script movie at first character's login(allows to prevent buggy intro in case of custom start location coordinates)
#        Default: 0 - show intro for each new character
#                 1 - show intro only for first character of selected race
#                 2 - disable intro in all cases
#
#    MaxPlayerLevel
#        Max level that can be reached by a player for experience (in range from 1 to 100).
#        Change not recommended
#        Default: 60
#
#    StartPlayerLevel
#        Staring level that have character at creating (in range 1 to MaxPlayerLevel)
#        Default: 1
#
#    StartPlayerMoney
#        Amount of money that new players will start with.
#        If you want to start with one silver, use for example 100 (100 copper = 1 silver)
#        Default: 0
#
#    MaxHonorPoints
#        Max honor points that player can have.
#        Default: 75000
#
#    StartHonorPoints
#        Amount of honor that new players will start with
#        Default: 0
#
#    MinHonorKills
#        Min kills that players must obtain to enter in weekly honor calculation
#        Default: 15
#
#    MaintenanceDay
#        The day of the week is performed server maintenance ( currently used for Honor distribution )
#        range (0..6): 0 is the first day of the week (normally sunday), 6 is the latest
#        Default: 3 (Wednesday in EU)
#
#    InstantLogout
#        Enable or disable instant logout for security level (0..4) or high (NOT in combat/while dueling/while falling)
#        Default: 1 (Mods/GMs/Admins)
#
#    AllFlightPaths
#        Players will start with all flight paths (Note: ALL flight paths, not only player's team)
#        Default: 0 (true)
#                 1 (false)
#
#    AlwaysMaxSkillForLevel
#        Players will automatically gain max level dependent (weapon/defense) skill when logging in, leveling up etc.
#        Default: 0 (false)
#                 1 (true)
#
#    ActivateWeather
#        Activate weather system
#        Default: 1 (true)
#                 0 (false)
#
#    CastUnstuck
#        Allow cast Unstuck spell at .start or client Help option use
#        Default: 1 (true)
#                 0 (false)
#
#    MaxSpellCastsInChain
#        Max amount triggered spell casts in chain by one caster, prevent stack overflow crash
#        Too Low value will make some correct triggered casts fail
#                 0 (no limit)
#        Default: 10
#
#    Instance.IgnoreLevel
#        Ignore level requirement to enter instance
#        Default: 0 (false)
#                 1 (true)
#
#    Instance.IgnoreRaid
#        Ignore raid requirement to enter instance
#        Default: 0 (false)
#                 1 (true)
#
#    Instance.ResetTimeHour
#        The hour of the day (0-23) when the global instance resets occur.
#        Default: 4
#
#    Instance.UnloadDelay
#        Unload the instance map from memory after some time if no players are inside.
#        Default: 1800000 (miliseconds, i.e 30 minutes)
#                 0 (instance maps are kept in memory until they are reset)
#
#    Quests.LowLevelHideDiff
#        Quest level difference to hide for player low level quests:
#        if player_level > quest_level + LowLevelQuestsHideDiff then quest "!" mark not show for quest giver
#        Default: 4
#                -1 (show all available quests marks)
#
#    Quests.HighLevelHideDiff
#        Quest level difference to hide for player high level quests:
#        if player_level < quest_min_level - HighLevelQuestsHideDiff then quest "!" mark not show for quest giver
#        Default: 7
#                -1 (show all available quests marks)
#
#    Quests.IgnoreRaid
#        Non-raid quests allowed in raids
#        Default: 0 (not allowed)
#                 1 (allowed)
#
#    Guild.EventLogRecordsCount
#        Count of guild event log records stored in guild_eventlog table
#        Increase to store more guild events in table, minimum is 100
#        You can set it to very high value to prevent oldest guild events to be rewritten by latest guild events - but it can slow down performance
#        Default: 100
#
#    TimerBar.Fatigue.GMLevel
#        Disable/enable fatigue for security level (0..4) or high
#        Default: 4 (None)
#
#    TimerBar.Fatigue.Max
#        Fatigue max timer value (in secs)
#        Default: 60 (1 minute)
#                  0 (instant death)
#
#    TimerBar.Breath.GMLevel
#        Disable/enable waterbreathing for security level (0..4) or high
#        Default: 4 (None)
#
#    TimerBar.Breath.Max
#        Waterbreathing max timer value (in secs)
#        Default: 180
#                   0 (instant underwater breathing damage start)
#
#    TimerBar.Fire.GMLevel
#        Disable/enable lava fire damage for security level (0..4) or high
#        Default: 4 (None)
#
#    TimerBar.Fire.Max
#        Lava damage delay max timer value (in secs)
#        Default:  1
#                  0 (instant in lava damage start)
#
#    MaxPrimaryTradeSkill
#        Max count that player can learn the primary trade skill.
#        Default: 2
#        Max : 10
#
#    MinPetitionSigns
#        Min signatures count to creating guild (0..9).
#        Default: 9
#
#    MaxGroupXPDistance
#        Max distance to creature for group memeber to get XP at creature death.
#        Default: 74
#
#    MailDeliveryDelay
#        Mail delivery delay time for item sending
#        Default: 3600 sec (1 hour)
#
#    MassMailer.SendPerTick
#        Max amount mail send each tick from mails list scheduled for mass mailer proccesing.
#        More mails increase server load but speedup mass mail proccess. Normal tick length: 50 msecs, so 20 ticks in sec and 200 mails in sec by default.
#        Default: 10
#
#    PetUnsummonAtMount
#        Persmanent pet will unsummoned at player mount
#        Default: 0 - not unsummon
#                 1 - unsummon for any mount
#
#    Event.Announce
#        Default: 0 (false)
#                 1 (true)
#
#    BeepAtStart
#        Beep at mangosd start finished (mostly work only at Unix/Linux systems)
#        Default: 1 (true)
#                 0 (false)
#
#    ShowProgressBars
#        Control show progress bars for load steps at server startup
#        Default: 1 (true)
#                 0 (false)
#
#    WaitAtStartupError
#        After startup error report wait <Enter> or some time before continue (and possible close console window)
#                 -1 (wait until <Enter> press)
#        Default:  0 (not wait)
#                  N (>0, wait N secs)
#
#    Motd
#        Message of the Day. Displayed at worldlogin for every user ('@' for a newline).
#
###################################################################################################################

GameType = 1
RealmZone = 1
DBC.Locale = 255
DeclinedNames = 0
StrictPlayerNames = 0
StrictCharterNames = 0
StrictPetNames = 0
MinPlayerName = 2
MinCharterName = 2
MinPetName = 2
CharactersCreatingDisabled = 0
CharactersPerAccount = 50
CharactersPerRealm = 10
SkipCinematics = 0
MaxPlayerLevel = 60
StartPlayerLevel = 1
StartPlayerMoney = 0
MaxHonorPoints = 75000
StartHonorPoints = 0
MinHonorKills = 15
MaintenanceDay = 3
InstantLogout = 1
AllFlightPaths = 0
AlwaysMaxSkillForLevel = 0
ActivateWeather = 1
CastUnstuck = 1
MaxSpellCastsInChain = 10
Instance.IgnoreLevel = 0
Instance.IgnoreRaid = 0
Instance.ResetTimeHour = 4
Instance.UnloadDelay = 1800000
Quests.LowLevelHideDiff = 4
Quests.HighLevelHideDiff = 7
Quests.IgnoreRaid = 0
Guild.EventLogRecordsCount = 100
TimerBar.Fatigue.GMLevel = 4
TimerBar.Fatigue.Max = 60
TimerBar.Breath.GMLevel = 4
TimerBar.Breath.Max = 180
TimerBar.Fire.GMLevel = 4
TimerBar.Fire.Max = 1
MaxPrimaryTradeSkill = 2
MinPetitionSigns = 9
MaxGroupXPDistance = 74
MailDeliveryDelay = 3600
MassMailer.SendPerTick = 10
PetUnsummonAtMount = 0
Event.Announce = 0
BeepAtStart = 1
ShowProgressBars = 1
WaitAtStartupError = 0
Motd = "Welcome to the Massive Network Game Object Server."

###################################################################################################################
# PLAYER INTERACTION
#
#    AllowTwoSide.Accounts
#        Allow accounts to create characters in both teams in any game type.
#        Default: 0 (Not allowed)
#                 1 (Allowed)
#
#    AllowTwoSide.Interaction.Chat
#    AllowTwoSide.Interaction.Channel
#    AllowTwoSide.Interaction.Group
#    AllowTwoSide.Interaction.Guild
#    AllowTwoSide.Interaction.Trade
#    AllowTwoSide.Interaction.Auction
#    AllowTwoSide.Interaction.Mail
#        Allow or not common :chat(say,yell);channel(chat)group(join)guild(join);trade with different team,
#        merge all auction houses for players from different teams, send mail to different team.
#        Default: 0 (Not allowed)
#                 1 (Allowed)
#
#    AllowTwoSide.WhoList
#        Allow show player from both team in who list.
#        Default: 0 (Not allowed)
#                 1 (Allowed)
#
#    AllowTwoSide.AddFriend
#        Allow adding friends from other team in friend list.
#        Default: 0 (Not allowed)
#                 1 (Allowed)
#
#    TalentsInspecting
#        Allow other players see character talents in inspect dialog (Characters in Gamemaster mode can
#        inspect talents always)
#        Default: 1 (allow)
#                 0 (not allow)
#
###################################################################################################################

AllowTwoSide.Accounts = 0
AllowTwoSide.Interaction.Chat = 0
AllowTwoSide.Interaction.Channel = 0
AllowTwoSide.Interaction.Group = 0
AllowTwoSide.Interaction.Guild = 0
AllowTwoSide.Interaction.Trade = 0
AllowTwoSide.Interaction.Auction = 0
AllowTwoSide.Interaction.Mail = 0
AllowTwoSide.WhoList = 0
AllowTwoSide.AddFriend = 0
TalentsInspecting = 1

###################################################################################################################
# CREATURE AND GAMEOBJECT SETTINGS
#
#    ThreatRadius
#        Radius for creature to evade after being pulled away from combat start point
#        If ThreatRadius is less than creature aggro radius then aggro radius will be used
#        Default: 100 yards
#
#    Rate.Creature.Aggro
#        Aggro radius percent or off.
#        Default: 1   - 100%
#                 1.5 - 150%
#                 0   - off (0%)
#
#    CreatureFamilyFleeAssistanceRadius
#        Radius which creature will use to seek for a near creature for assistance. Creature will flee to this creature.
#        Default: 30
#                 0   - off
#
#    CreatureFamilyAssistanceRadius
#        Radius which creature will use to call assistance without moving
#        Default: 10
#                 0   - off
#
#    CreatureFamilyAssistanceDelay
#        Reaction time for creature assistance call
#        Default: 1500 (1.5s)
#
#    CreatureFamilyFleeDelay
#        Time during which creature can flee when no assistant found
#        Default: 7000 (7s)
#
#    WorldBossLevelDiff
#        Difference for boss dynamic level with target
#        Default: 3
#
#    Corpse.EmptyLootShow
#        If target can have loot (or can be skining after loot) but no loot generated still show loot window
#        Default: 1 (show)
#                 0 (not show)
#
#    Corpse.Decay.NORMAL
#    Corpse.Decay.RARE
#    Corpse.Decay.ELITE
#    Corpse.Decay.RAREELITE
#    Corpse.Decay.WORLDBOSS
#        Seconds until creature corpse will decay without being looted or skinned (not used when creature does not have loot initially)
#        Default: 300, 900, 600, 1200, 3600
#
#    Rate.Corpse.Decay.Looted
#         Controls how long the creature corpse stays after it had been looted, as a multiplier of its Corpse.Decay.* config.
#         Default: 0.0 (will use modifier /3 of the creatures spawntimesecs when 0.0)
#
#    Rate.Creature.Normal.Damage
#    Rate.Creature.Elite.Elite.Damage
#    Rate.Creature.Elite.RAREELITE.Damage
#    Rate.Creature.Elite.WORLDBOSS.Damage
#    Rate.Creature.Elite.RARE.Damage
#        Creature Damage Rates.
#        Examples: 2 - creatures will damage 2x, 1.7 - 1.7x.
#
#    Rate.Creature.Normal.SpellDamage
#    Rate.Creature.Elite.Elite.SpellDamage
#    Rate.Creature.Elite.RAREELITE.SpellDamage
#    Rate.Creature.Elite.WORLDBOSS.SpellDamag
#    Rate.Creature.Elite.RARE.SpellDamage
#        Creature Spell Damage Rates.
#        Examples: 2 - creatures will damage with spells 2x, 1.7 - 1.7x.
#
#    Rate.Creature.Normal.HP
#    Rate.Creature.Elite.Elite.HP
#    Rate.Creature.Elite.RAREELITE.HP
#    Rate.Creature.Elite.WORLDBOSS.HP
#    Rate.Creature.Elite.RARE.HP
#        Creature Health Ammount Modifier.
#        Examples: 2 - creatures have 2x health, 1.7 - 1.7x.
#
#    ListenRange.Say
#        Distance from player to listen text that creature (or other world object) say
#        Default: 25
#
#    ListenRange.TextEmote
#        Distance from player to listen textemote that creature (or other world object) say
#        Default: 25
#
#    ListenRange.Yell
#        Distance from player to listen text that creature (or other world object) yell
#        Default: 300
#
#    GuidReserveSize.Creature
#    GuidReserveSize.GameObject
#        Amount guids reserved for .npc add/.gobject add directly after last used in DB static spawned creature/gameobject guid
#        Commands .npc add/.gobject add can be used only for guids from this reserve and required server restart if all guids
#        from reserve used before above commands can be used in like case. Less size increase amount guids for dynamic spawns
#        in game from other side
#        Default: 100
#
###################################################################################################################

ThreatRadius = 100
Rate.Creature.Aggro = 1
CreatureFamilyFleeAssistanceRadius = 30
CreatureFamilyAssistanceRadius = 10
CreatureFamilyAssistanceDelay = 1500
CreatureFamilyFleeDelay = 7000
WorldBossLevelDiff = 3
Corpse.EmptyLootShow = 1
Corpse.Decay.NORMAL = 300
Corpse.Decay.RARE = 900
Corpse.Decay.ELITE = 600
Corpse.Decay.RAREELITE = 1200
Corpse.Decay.WORLDBOSS = 3600
Rate.Corpse.Decay.Looted = 0.0
Rate.Creature.Normal.Damage = 1
Rate.Creature.Elite.Elite.Damage = 1
Rate.Creature.Elite.RAREELITE.Damage = 1
Rate.Creature.Elite.WORLDBOSS.Damage = 1
Rate.Creature.Elite.RARE.Damage = 1
Rate.Creature.Normal.SpellDamage = 1
Rate.Creature.Elite.Elite.SpellDamage = 1
Rate.Creature.Elite.RAREELITE.SpellDamage = 1
Rate.Creature.Elite.WORLDBOSS.SpellDamage = 1
Rate.Creature.Elite.RARE.SpellDamage = 1
Rate.Creature.Normal.HP = 1
Rate.Creature.Elite.Elite.HP = 1
Rate.Creature.Elite.RAREELITE.HP = 1
Rate.Creature.Elite.WORLDBOSS.HP = 1
Rate.Creature.Elite.RARE.HP = 1
ListenRange.Say = 40
ListenRange.TextEmote = 40
ListenRange.Yell = 300
GuidReserveSize.Creature = 100
GuidReserveSize.GameObject = 100


###################################################################################################################
# CHAT SETTINGS
#
#    ChatFakeMessagePreventing
#        Chat protection from creating fake messages using a lot spaces (other invisible symbols),
#        not applied to addon language messages, but can prevent working old addons
#        that use normal languages for sending data to another clients.
#        Default: 0 (disable fake messages preventing)
#                 1 (enable fake messages preventing)
#
#    ChatStrictLinkChecking.Severity
#        Check chat messages for ingame links to spells, items, quests, achievements etc.
#        Default: 0 (disable link checking)
#                 1 (check if only valid pipe commands are used. This prevents posting pictures for example)
#                 2 (verifiy that pipe commands are used in a correct order)
#                 3 (check if color, entry and name don't contradict each other. For correct work, please assure
#                    that you have extracted locale DBCs of every language specific client playing on this server.)
#
#    ChatStrictLinkChecking.Kick
#        Defines, what should be done if a message is considered to contain invalid pipe commands.
#        Default: 0 (silently ignore message)
#                 1 (kick players who sent invalid formed messages)
#
#    ChatFlood.MessageCount
#        Chat anti-flood protection, haste message count to activate protection
#        Default: 10
#                 0 (disable anti-flood protection)
#
#    ChatFlood.MessageDelay
#        Chat anti-flood protection, minimum message delay to count message
#        Default: 1 (in secs)
#
#    ChatFlood.MuteTime
#        Chat anti-flood protection, mute time at activation flood protection (not saved)
#        Default: 10 (in secs)
#
#    Channel.SilentlyGMJoin
#        Silently join GM characters (security level > 1) to channels
#        Default: 0 (join announcement in normal way)
#                 1 (GM join without announcement)
#
###################################################################################################################

ChatFakeMessagePreventing = 0
ChatStrictLinkChecking.Severity = 0
ChatStrictLinkChecking.Kick = 0
ChatFlood.MessageCount = 10
ChatFlood.MessageDelay = 1
ChatFlood.MuteTime = 10
Channel.SilentlyGMJoin = 0

###################################################################################################################
# GAME MASTER SETTINGS
#
#    GM.LoginState
#        GM mode at login
#        Default: 2 (last save state)
#                 0 (disable)
#                 1 (enable)
#
#    GM.Visible
#        GM visibility at login
#        Default: 2 (last save state)
#                 0 (invisible)
#                 1 (visible)
#
#    GM.AcceptTickets
#        Is GM accepting tickets from player by default or not.
#        Default: 2 (last save state)
#                 0 (disable)
#                 1 (enable)
#
#    GM.Chat
#        GM chat mode at login
#        Default: 2 (last save state)
#                 0 (disable)
#                 1 (enable)
#
#    GM.WhisperingTo
#        Is GM accepting whispers from player by default or not.
#        Default: 2 (last save state)
#                 0 (disable)
#                 1 (enable)
#
#    GM.InGMList.Level
#        Max GM level showed in GM list (if visible) in non-GM state (.gm off)
#                 0 (none)
#                 1 (only moderators)
#                 2 (only gamemasters)
#        Default: 3 (anyone)
#
#    GM.InWhoList.Level
#        Max GM level showed in who list (if visible).
#                 0 (only players)
#                 1 (only moderators)
#                 2 (only gamemasters)
#        Default: 3 (anyone)
#
#    GM.LogTrade
#        Include GM trade and trade slot enchanting operations in GM log if it enable
#        Default: 1 (include)
#                 0 (not include)
#
#    GM.StartLevel
#        GM starting level (1-255)
#        Default: 1
#
#    GM.LowerSecurity
#        Disallow a lower security member to interact with a higher one using commands
#        Default: 0 (disable)
#                 1 (enable)
#
###################################################################################################################

GM.LoginState            = 2
GM.Visible               = 2
GM.AcceptTickets         = 2
GM.Chat                  = 2
GM.WhisperingTo          = 2
GM.InGMList.Level        = 3
GM.InWhoList.Level       = 3
GM.LogTrade              = 1
GM.StartLevel            = 1
GM.LowerSecurity         = 0

###################################################################################################################
# VISIBILITY AND RADIUSES
#
#    Visibility.GroupMode
#        Group visibility modes
#        Default: 0 (standard setting: only members from same group can 100% auto detect invisible player)
#                 1 (raid members 100% auto detect invisible player from same raid)
#                 2 (players from same team can 100% auto detect invisible player)
#
#    Visibility.Distance.Continents
#    Visibility.Distance.Instances
#    Visibility.Distance.BG
#        Visibility distance for different ingame object in different maps.
#        Visibility on continents on offy ~90 yards. In BG ~180. For instances default ~120.
#        Max limited by active player zone: ~ 333
#        Min limit is max aggro radius (45) * Rate.Creature.Aggro
#
#    Visibility.Distance.InFlight
#        Visible distance for player in flight
#        Min limit is 0 (not show any objects)
#
#    Visibility.Distance.Grey.Unit
#        Visibility grey distance for creatures/players (fast changing objects)
#        addition to appropriate object type Visibility.Distance.* use in case visibility removing to
#        object (except corpse around distances) If D is distance and G is grey distance then object
#        make visible if distance to it <= D but make non visible if distance > D+G
#        Default: 1 (yard)
#
#    Visibility.Distance.Grey.Object
#        Visibility grey distance for dynobjects/gameobjects/corpses/creature bodies
#        Default: 10 (yards)
#
#    Visibility.RelocationLowerLimit
#        Object's visibility update called, when distance between current object's position and position,
#        where visiblity was updated last time, reaches RelocationLoverLimit value
#        Default: 10 (yards)
#
#    Visibility.AIRelocationNotifyDelay
#        Delay time between creature AI reactions on nearby movements
#        Default: 1000 (milliseconds)
#
###################################################################################################################

Visibility.GroupMode = 0
Visibility.Distance.Continents    = 90
Visibility.Distance.Instances     = 120
Visibility.Distance.BG            = 180
Visibility.Distance.InFlight      = 100
Visibility.Distance.Grey.Unit   = 1
Visibility.Distance.Grey.Object = 10
Visibility.RelocationLowerLimit    = 10
Visibility.AIRelocationNotifyDelay = 1000

###################################################################################################################
# SERVER RATES
#
#    Rate.Health
#    Rate.Mana
#    Rate.Rage.Income
#    Rate.Rage.Loss
#    Rate.Focus
#    Rate.Loyalty
#    Rate.Energy (Rogue)
#        Health and power regeneration and rage income from damage.
#        Default: 1
#
#    Rate.Skill.Discovery
#         Skill Discovery Rates
#         Default: 1
#
#    Rate.Drop.Item.Poor
#    Rate.Drop.Item.Normal
#    Rate.Drop.Item.Uncommon
#    Rate.Drop.Item.Rare
#    Rate.Drop.Item.Epic
#    Rate.Drop.Item.Legendary
#    Rate.Drop.Item.Artifact
#    Rate.Drop.Item.Referenced
#    Rate.Drop.Money
#         Drop rates (items by quality and money)
#         Default: 1
#
#    Rate.XP.Kill
#    Rate.XP.Quest
#    Rate.XP.Explore
#        XP rates
#        Default: 1
#
#    Rate.Rest.InGame
#    Rate.Rest.Offline.InTavernOrCity
#    Rate.Rest.Offline.InWilderness
#        Resting points grow rates (1 - normal, 2 - double rate, 0.5 - half rate, etc) from standard values
#
#    Rate.Damage.Fall
#        Damage after fall rate. (1 - standard, 2 - double damage, 0.5 - half damage, etc)
#
#    Rate.Auction.Time
#    Rate.Auction.Deposit
#    Rate.Auction.Cut
#        Auction rates (auction time, deposit get at auction start, auction cut from price at auction end)
#
#    Auction.Deposit.Min
#        Minimum auction deposit size in copper
#        Default: 0
#
#    Rate.Honor
#        Honor gain rate
#
#    Rate.Mining.Amount
#    Rate.Mining.Next
#        Mining Rates (Mining.Amount changes minimum/maximum usetimes of a deposit,
#        Mining.Next changes chance to have next use of a deposit)
#
#    Rate.Talent
#        Talent Point rates
#        Default: 1
#
#    Rate.Reputation.Gain
#         Reputation Gain rate
#         Default: 1
#
#    Rate.Reputation.LowLevel.Kill
#         Reputation Gain form low level kill (grey creture)
#         Default: 0.2
#
#    Rate.Reputation.LowLevel.Quest
#         Reputation Gain rate
#         Default: 1
#
#    Rate.InstanceResetTime
#        Multiplier for the number of days in between global raid/heroic instance resets.
#        Default: 1
#
#    SkillGain.Crafting
#    SkillGain.Defense
#    SkillGain.Gathering
#    SkillGain.Weapon
#         crafting/defense/gathering/weapon skills gain at skill grow (1,2,...)
#         Default: 1
#
#    SkillChance.Orange
#    SkillChance.Yellow
#    SkillChance.Green
#    SkillChance.Grey
#        Skill chance values (0..100)
#        Default: 100-75-25-0
#
#    SkillChance.MiningSteps
#    SkillChance.SkinningSteps
#         For skinning and Mining chance decrease with skill level.
#         Default: 0  - no decrease
#                  75 - in 2 times each 75 skill points
#
#    SkillFail.Loot.Fishing
#         For fishing instead fail provided junk loot
#         Default: 0 (disabled)
#                  1 (enabled)
#
#    SkillFail.Gain.Fishing
#         For fishing skill gain possible at fail also
#         Default: 0 (disabled)
#                  1 (enabled)
#
#    SkillFail.Possible.FishingPool
#         For fishing pool impossible fail from low skill by default
#         Default: 1 (enabled)
#                  0 (disabled)
#
#    DurabilityLossChance.Damage
#         Chance lost one from equiped items durability point at damage apply or receive.
#         Default: 0.5 (100/0.5 = 200) Each 200 damage apply one from 19 possible equipped items
#
#    DurabilityLossChance.Absorb
#         Chance lost one from armor items durability point at damage absorb.
#         Default: 0.5 (100/0.5 = 200) Each 200 absorbs apply one from 15 possible armor equipped items
#
#    DurabilityLossChance.Parry
#         Chance lost weapon durability point at parry.
#         Default: 0.05 (100/0.05 = 2000) Each 2000 parry attacks main weapon lost point
#
#    DurabilityLossChance.Block
#         Chance lost sheild durability point at damage block.
#         Default: 0.05 (100/0.05 = 2000) Each 2000 partly or full blocked attacks shield lost point
#
#    Death.SicknessLevel
#         Starting Character start gain sickness at spirit resurrection (1 min)
#         Default: 11
#                  -10 - character will have full time (10min) sickness at 1 level
#                  maxplayerlevel+1 - character will not have sickness at any level
#
#    Death.CorpseReclaimDelay.PvP
#    Death.CorpseReclaimDelay.PvE
#         Enabled/disabled increase corpse reclaim delay at often PvP/PvE deaths
#         Default: 1 (enabled)
#                  0 (disabled)
#
#    Death.Bones.World
#    Death.Bones.Battleground
#         Enabled/disabled creating bones instead corpse at resurrection (in normal zones/instacnes, or battleground)
#         Default: 1 (enabled)
#                  0 (disabled)
#
#    Death.Ghost.RunSpeed.World
#    Death.Ghost.RunSpeed.Battleground
#         Modifies the speed of player's ghosts, removed upon reviving, not permanent/saved, in non-BG and BG maps
#         Default: 1.0 (normal speed)
#
###################################################################################################################

Rate.Health = 1
Rate.Mana = 1
Rate.Rage.Income = 1
Rate.Rage.Loss = 1
Rate.Focus = 1
Rate.Loyalty = 1
Rate.Energy = 1
Rate.Skill.Discovery = 1
Rate.Drop.Item.Poor = 1
Rate.Drop.Item.Normal = 1
Rate.Drop.Item.Uncommon = 1
Rate.Drop.Item.Rare = 1
Rate.Drop.Item.Epic = 1
Rate.Drop.Item.Legendary = 1
Rate.Drop.Item.Artifact = 1
Rate.Drop.Item.Referenced = 1
Rate.Drop.Money = 1
Rate.XP.Kill    = 1
Rate.XP.Quest   = 1
Rate.XP.Explore = 1
Rate.Rest.InGame = 1
Rate.Rest.Offline.InTavernOrCity = 1
Rate.Rest.Offline.InWilderness = 1
Rate.Damage.Fall = 1
Rate.Auction.Time = 1
Rate.Auction.Deposit = 1
Rate.Auction.Cut = 1
Auction.Deposit.Min = 0
Rate.Honor = 1
Rate.Mining.Amount = 1
Rate.Mining.Next   = 1
Rate.Talent = 1
Rate.Reputation.Gain = 1
Rate.Reputation.LowLevel.Kill    = 0.2
Rate.Reputation.LowLevel.Quest   = 1
Rate.InstanceResetTime = 1
SkillGain.Crafting = 1
SkillGain.Defense = 1
SkillGain.Gathering = 1
SkillGain.Weapon = 1
SkillChance.Orange = 100
SkillChance.Yellow = 75
SkillChance.Green  = 25
SkillChance.Grey   = 0
SkillChance.MiningSteps   = 0
SkillChance.SkinningSteps = 0
SkillFail.Loot.Fishing = 0
SkillFail.Gain.Fishing = 0
SkillFail.Possible.FishingPool = 1
DurabilityLossChance.Damage = 0.5
DurabilityLossChance.Absorb = 0.5
DurabilityLossChance.Parry  = 0.05
DurabilityLossChance.Block  = 0.05
Death.SicknessLevel = 11
Death.CorpseReclaimDelay.PvP = 1
Death.CorpseReclaimDelay.PvE = 1
Death.Bones.World = 1
Death.Bones.Battleground = 1
Death.Ghost.RunSpeed.World = 1.0
Death.Ghost.RunSpeed.Battleground = 1.0

###################################################################################################################
# BATTLEGROUND CONFIG
#
#    Battleground.CastDeserter
#        Cast Deserter spell at player who leave battleground in progress
#        Default: 1 (enable)
#                 0 (disable)
#
#    Battleground.QueueAnnouncer.Join
#        Enable queue announcer posting to chat at join
#        Default: 0 (not send)
#                 1 (send to joined player only)
#                 2 (send to all players)
#
#    Battleground.QueueAnnouncer.Start
#        Enable queue announcer posting to chat at BG start
#        Default: 0 (disable)
#                 1 (enable)
#
#    Battleground.InvitationType
#        Set Battleground invitation type
#        Default: 0 (normal - invite as much players to bg as possible, don't bother with ballance)
#                 1 (Experimental - don't allow to invite much more players of one faction)
#
#    Battleground.PrematureFinishTimer
#        The time to end the bg if there are less than MinPlayersPerTeam on one side in milliseconds
#        Default: 300000 (5 minutes)
#                 0 - disable (not recommended)
#
#    BattleGround.PremadeGroupWaitForMatch
#        The time in which premade group of 1 faction waits in BG Queue for premade group of other faction
#                 1800000 (30 minutes)
#        Default: 0 - disable premade group matches (group always added to bg team in normal way)
#
###################################################################################################################

Battleground.CastDeserter = 1
Battleground.QueueAnnouncer.Join = 0
Battleground.QueueAnnouncer.Start = 0
Battleground.InvitationType = 0
BattleGround.PrematureFinishTimer = 300000
BattleGround.PremadeGroupWaitForMatch = 0

###################################################################################################################
#
# NETWORK CONFIG
#
#    Network.Threads
#         Number of threads for network, recommend 1 thread per 1000 connections.
#         Default: 1
#
#    Network.OutKBuff
#         The size of the output kernel buffer used ( SO_SNDBUF socket option, tcp manual ).
#         Default: -1 (Use system default setting)
#
#    Network.OutUBuff
#         Userspace buffer for output. This is amount of memory reserved per each connection.
#         Default: 65536
#
#    Network.TcpNoDelay:
#         TCP Nagle algorithm setting
#         Default: 0 (enable Nagle algorithm, less traffic, more latency)
#                  1 (TCP_NO_DELAY, disable Nagle algorithm, more traffic but less latency)
#
#    Network.KickOnBadPacket
#         Kick player on bad packet format.
#         Default: 0 - do not kick
#                  1 - kick
#
###################################################################################################################

Network.Threads = 1
Network.OutKBuff = -1
Network.OutUBuff = 65536
Network.TcpNodelay = 1
Network.KickOnBadPacket = 0

###################################################################################################################
# CONSOLE, REMOTE ACCESS AND SOAP
#
#    Console.Enable
#        Enable console
#        Default: 1 - on
#                 0 - off
#
#    Ra.Enable
#        Enable remote console
#        Default: 0 - off
#                 1 - on
#
#    Ra.IP
#        Default remote console ip address, use 0.0.0.0 for every address
#
#    Ra.Port
#        Default remote console port
#        Default: 3443
#
#    Ra.MinLevel
#        Minimum level that's required to login,3 by default
#        Default: 3 (Administrator)
#
#    Ra.Secure
#        Kick client on wrong pass
#                 0 - off
#        Default: 1 - on
#
#    Ra.Stricted
#        Not allow execute console level only commands remotly by RA
#                 0 - off
#        Default: 1 - on
#
#
#    SOAP.Enable
#        Enable soap service
#        Default: 0 - off
#                 1 - on
#
#    SOAP.IP
#        Bound SOAP service ip address, use 0.0.0.0 to access from everywhere
#        Default: 127.0.0.1
#
#    SOAP.Port
#        SOAP port
#        Default: 7878
#
###################################################################################################################

Console.Enable = 1
Ra.Enable = 0
Ra.IP = 0.0.0.0
Ra.Port = 3443
Ra.MinLevel = 3
Ra.Secure = 1
Ra.Stricted = 1

SOAP.Enabled = 0
SOAP.IP = 127.0.0.1
SOAP.Port = 7878

###################################################################################################################
#    CharDelete.Method
#        Character deletion behavior
#        Default: 0  - Completely remove the character from the database
#                 1  - Unlinking, the character gets unlinked from the account,
#                      the name gets freed up and appears as deleted ingame
#
#    CharDelete.MinLevel
#        Character gets deleted by CharDelete.Method=0 when the character
#        hasn't the specified level yet.
#        Default: 0  - For all characters the specified mode will be used
#                 1+ - Only for players which have reached the specified level
#                      will be deleted by the specified mode.
#                      the rest will be deleted by CharDelete.Method=0
#
#    CharDelete.KeepDays
#        Define the amount of days for which the characters are kept in the database before
#        they will be removed
#        Default: 30
#                 0  - Don't delete any characters, they stay in the database forever.
#
###################################################################################################################

CharDelete.Method = 0
CharDelete.MinLevel = 0
CharDelete.KeepDays = 30

Link to comment
Share on other sites
Unkle Nuke Advanced Member

Unkle Nuke

Posted
Posted

Are you sure you forwarded all the correct ports through your firewall for mangosd, realmd, and your game client?

Did you open your realmd database and edit the realmlist table such that [em]name[/em], [em]address[/em], and [em]port[/em] match the settings for your server?

Also, did you change the settings in your client's realmlist.wtf file to your server's IP address?

Those are the basics of setting up connectivity with your client and server.

Link to comment
Share on other sites
  • 2 weeks later...
  • 2 months later...
GreenCode Newbie

GreenCode

Posted
Posted

hmm... i'm havinng trouble with Mangos Zero, when shutting down, or restarting the server (ingame restart command).

The Crash-File:

Revision: * * 1774 *

Date 28:3:2012. Time 15:25

//=====================================================

*** Hardware ***

Processor: Intel® Core i3 CPU 540 @ 3.07GHz

Number Of Processors: 4

Physical Memory: 3135400 KB (Available: 2530900 KB)

Commit Charge Limit: 4194303 KB

*** Operation System ***

Microsoft Windows XP Professional Service Pack 3 (Version 5.1, Build 2600)

//=====================================================

Exception code: C0000005 ACCESS_VIOLATION

Fault address: 00431466 01:00030466 C:\\[my Directory]\\mangosd.exe

Registers:

EAX:055CFEF0

EBX:00000006

ECX:7A537C50

EDX:00000000

ESI:7A66D440

EDI:7A537C50

CS:EIP:001B:00431466

SS:ESP:0023:055CFEC0 EBP:055CFEC0

DS:0023 ES:0023 FS:003B GS:0000

Flags:00010206

Call stack:

Address Frame Function SourceFile

00431466 00000000 std::_Tree<std::_Tset_traits<unsigned int,std::less<unsigned int>,std::allocator<unsigned int>,0> >::_Eqrange+6

006E1003 00000000 BattleGround::~BattleGround+E3

006106FB 00000000 BattleGroundAB::`scalar deleting destructor'+B

00607083 00000000 BattleGroundMgr::DeleteAllBattleGrounds+73

00450680 00000000 WorldRunnable::run+D0

00461BD0 00000000 ACE_Based::Thread::ThreadTask+10

00967064 00000000 ACE_OS_Thread_Adapter::invoke+74

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

7C802542 00000000 WaitForSingleObject+12

0091AB83 00000000 ACE_OS::thr_join+23

0098DF91 00000000 ACE_Thread_Manager::wait_task+1E1

00989D6F 00000000 ACE_Task_Base::wait+F

005D690F 00000000 WorldSocketMgr::Wait+1F

0044F287 00000000 Master::Run+5E7

0044BC6E 00000000 main+3AE

004527AF 00000000 __tmainCRTStartup+122

7C817077 00000000 RegisterWaitForInputIdle+49

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

7C802455 00000000 Sleep+F

00461CEE 00000000 ACE_Based::Thread::Sleep+3E

004632FD 00000000 SqlDelayThread::run+2D

00461BD0 00000000 ACE_Based::Thread::ThreadTask+10

00967064 00000000 ACE_OS_Thread_Adapter::invoke+74

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

7C802455 00000000 Sleep+F

00461CEE 00000000 ACE_Based::Thread::Sleep+3E

004632FD 00000000 SqlDelayThread::run+2D

00461BD0 00000000 ACE_Based::Thread::ThreadTask+10

00967064 00000000 ACE_OS_Thread_Adapter::invoke+74

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

7C802455 00000000 Sleep+F

00461CEE 00000000 ACE_Based::Thread::Sleep+3E

004632FD 00000000 SqlDelayThread::run+2D

00461BD0 00000000 ACE_Based::Thread::ThreadTask+10

00967064 00000000 ACE_OS_Thread_Adapter::invoke+74

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

055CEF3C 00000000 0000:00000000

C55015FF FFFFFFFF 0000:00000000

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

7C872A51 00000000 GetConsoleInputWaitHandle+318

7C872B98 00000000 ReadConsoleA+3B

7C8018B7 00000000 ReadFile+A5

78ABBFEE 00000000 ??0__non_rtti_object@std@@QAE@ABV01@@Z+12A

78ABC0B9 00000000 _read+81

78ABCE99 00000000 _filbuf+55

78B0357B 00000000 fgets+F8

0044089D 00000000 CliRunnable::run+AD

00461BD0 00000000 ACE_Based::Thread::ThreadTask+10

00967064 00000000 ACE_OS_Thread_Adapter::invoke+74

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

719B5FA7 00000000 0001:00004FA7 C:\\WINDOWS\\system32\\MSWSOCK.dll

71A1314F 00000000 select+A7

00925820 00000000 ACE_Select_Reactor_T<ACE_Reactor_Token_T<ACE_Token> >::wait_for_multiple_events+120

0098FA61 00000000 ACE_TP_Reactor::get_event_for_dispatching+91

00990482 00000000 ACE_TP_Reactor::dispatch_i+12

00990616 00000000 ACE_TP_Reactor::handle_events+B6

00972C3E 00000000 ACE_Reactor::run_reactor_event_loop+2E

005D8C91 00000000 ReactorRunnable::svc+D1

00989FDE 00000000 ACE_Task_Base::svc_run+2E

0098A3BB 00000000 ACE_Thread_Adapter::invoke_i+6B

0098A503 00000000 ACE_Thread_Adapter::invoke+83

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

Call stack:

Address Frame Function SourceFile

7C91E514 00000000 KiFastSystemCallRet+0

719B5FA7 00000000 0001:00004FA7 C:\\WINDOWS\\system32\\MSWSOCK.dll

71A1314F 00000000 select+A7

00925820 00000000 ACE_Select_Reactor_T<ACE_Reactor_Token_T<ACE_Token> >::wait_for_multiple_events+120

0098FA61 00000000 ACE_TP_Reactor::get_event_for_dispatching+91

00990482 00000000 ACE_TP_Reactor::dispatch_i+12

00990616 00000000 ACE_TP_Reactor::handle_events+B6

00972C3E 00000000 ACE_Reactor::run_reactor_event_loop+2E

005D8C91 00000000 ReactorRunnable::svc+D1

00989FDE 00000000 ACE_Task_Base::svc_run+2E

0098A3BB 00000000 ACE_Thread_Adapter::invoke_i+6B

0098A503 00000000 ACE_Thread_Adapter::invoke+83

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

========================

Local Variables And Parameters

Call stack:

Address Frame Function SourceFile

00431466 00000000 std::_Tree<std::_Tset_traits<unsigned int,std::less<unsigned int>,std::allocator<unsigned int>,0> >::_Eqrange+6

Local <user defined> '_Keyval'

006E1003 00000000 BattleGround::~BattleGround+E3

006106FB 00000000 BattleGroundAB::`scalar deleting destructor'+B

00607083 00000000 BattleGroundMgr::DeleteAllBattleGrounds+73

00450680 00000000 WorldRunnable::run+D0

00461BD0 00000000 ACE_Based::Thread::ThreadTask+10

punting on symbol param

00967064 00000000 ACE_OS_Thread_Adapter::invoke+74

punting on symbol status

78AFC6DE 00000000 _endthreadex+3A

78AFC788 00000000 _endthreadex+E4

7C80B729 00000000 GetModuleFileNameA+1BA

========================

Global Variables

Can someone help? Or is this just normal?

Link to comment
Share on other sites
 Share
Go to topic listing

Contact Us

To contact us click here
You can also email us at [email protected]

Privacy Policy | Terms & Conditions

Repositories

The Link to the master list
of MaNGOS repositories:
Copyright © getMaNGOS. All rights Reserved.

This website is in no way associated with or endorsed by Blizzard Entertainment®
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy Terms of Use